Current configuration: ! version 12.0 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Router ! enable password cisco 进去特权模式的密码 ! username cisco password 0 cisco 远程telnet管理登陆的用户名和密码 ip subnet-zero bridge irb 桥接路由 ! ! ! interface Port-channel1 建立一个快速通道 no ip address no ip directed-broadcast hold-queue 300 in ! interface Port-channel1.1 设置快速通道的vlan1接口，子端口1 encapsulation dot1Q 1 native 封装802.1q协议，设置为vlan 1 no ip redirects no ip directed-broadcast bridge-group 1 桥接本交换机所有的vlan 1 ! interface Port-channel1.2 设置快速通道vlan 2接口，子端口2 encapsulation dot1Q 2 封装802.1q协议，设置为vlan 2 no ip redirects no ip directed-broadcast bridge-group 2 桥接本交换机的 vlan 2 ! interface Port-channel1.3 encapsulation dot1Q 3 no ip redirects no ip directed-broadcast bridge-group 3 ! interface Port-channel1.4 encapsulation dot1Q 4 no ip redirects no ip directed-broadcast bridge-group 4 ! interface Port-channel1.5 encapsulation dot1Q 5 no ip redirects no ip directed-broadcast bridge-group 5 ! interface Port-channel1.6 encapsulation dot1Q 6 no ip redirects no ip directed-broadcast bridge-group 6 ! interface Port-channel1.10 encapsulation dot1Q 10 no ip redirects no ip directed-broadcast bridge-group 10 ! interface GigabitEthernet1 no ip address no ip directed-broadcast ! interface GigabitEthernet1.1 设置第一个千兆口的第一个子端口 encapsulation dot1Q 1 native 使第一个子端口划分为vlan 1中 no ip redirects no ip directed-broadcast bridge-group 1 ! interface GigabitEthernet1.2 设置第一个千兆口的第二个子端口 encapsulation dot1Q 2 把第二个子端口划分为 vlan 2中(注：第2个子端口必须划分到vlan 2,不能划分到其他vlan否则，就无效)
